Hitachi SJ Series - Page 79

7.
・
・
Chapter 7
7.
6.3
Take Out the Operator Keypad on the
Panel
・
We want to take out the operator
front side of the panel where the inverter is installed
to operate it.
・
You can take out the operator keypad VOP outside
the panel for operation. When taking the VOP
outside the panel, please contact the inverter
technical communication
cover.
Q
A
Chapter 7
Take Out the Operator Keypad on the
Panel
We want to take out the operator
front side of the panel where the inverter is installed
to operate it.
You can take out the operator keypad VOP outside
the panel for operation. When taking the VOP
outside the panel, please contact the inverter
technical communication
Take Out the Operator Keypad on the
We want to take out the operator
keypad on the
front side of the panel where the inverter is installed
You can take out the operator keypad VOP outside
the panel for operation. When taking the VOP
outside the panel, please contact the inverter
technical communication
center shown in the back
Take Out the Operator Keypad on the
keypad on the
front side of the panel where the inverter is installed
You can take out the operator keypad VOP outside
the panel for operation. When taking the VOP
outside the panel, please contact the inverter
center shown in the back
7-24
Wire Connection and Optional Devices
Take Out the Operator Keypad on the
keypad on the
front side of the panel where the inverter is installed
You can take out the operator keypad VOP outside
center shown in the back
・
To remove the operator keypad from the inverter to
use it, order a connector cable option ICS
ICS
・
If you prepare a cable by yourself, the following
cables are
TSUKO Cat5e cable with connectors at both ends
Hitachi Metals, Ltd. Straight wire with connectors
・
Use a connector cable within 3m.
If you use the connector
cause malfunctioning.
・
While power is supplied to the inverter, do not
attach or remove the operator keypad.
!
Wire Connection and Optional Devices
To remove the operator keypad from the inverter to
use it, order a connector cable option ICS
ICS
-3 (3m).
If you prepare a cable by yourself, the following
cables are
recommended.
TSUKO Cat5e cable with connectors at both ends
(twisted wire)
TSUNET-
MC350E
Hitachi Metals, Ltd. Straight wire with connectors
at both ends
NETSTAR
-
Use a connector cable within 3m.
If you use the connector
cause malfunctioning.
While power is supplied to the inverter, do not
attach or remove the operator keypad.
Wire Connection and Optional Devices
To remove the operator keypad from the inverter to
use it, order a connector cable option ICS
If you prepare a cable by yourself, the following
recommended.
TSUKO Cat5e cable with connectors at both ends
(twisted wire)
MC350E
-
MP 8C B 8
Hitachi Metals, Ltd. Straight wire with connectors
at both ends
-
C5E PC 24AWGX4P
Use a connector cable within 3m.
If you use the connector
exceeding 3m, it may
cause malfunctioning.
While power is supplied to the inverter, do not
attach or remove the operator keypad.
Wire Connection and Optional Devices
To remove the operator keypad from the inverter to
use it, order a connector cable option ICS
If you prepare a cable by yourself, the following
recommended.
TSUKO Cat5e cable with connectors at both ends
MP 8C B 8
-8
Hitachi Metals, Ltd. Straight wire with connectors
C5E PC 24AWGX4P
Use a connector cable within 3m.
exceeding 3m, it may
While power is supplied to the inverter, do not
attach or remove the operator keypad.
Wire Connection and Optional Devices
To remove the operator keypad from the inverter to
use it, order a connector cable option ICS
-
1 (1m) or
If you prepare a cable by yourself, the following
TSUKO Cat5e cable with connectors at both ends
Hitachi Metals, Ltd. Straight wire with connectors
exceeding 3m, it may
While power is supplied to the inverter, do not
attach or remove the operator keypad.
Wire Connection and Optional Devices
To remove the operator keypad from the inverter to
1 (1m) or
TSUKO Cat5e cable with connectors at both ends
Hitachi Metals, Ltd. Straight wire with connectors