14
6. Execute smu-version (verify the SMU version is the matching or latest version of
firmware)
7. Logout by typing exit
8.
Using the ethernet connection to the HNAS management switch, open an ssh putty
session to the new SMU at 192.0.2.1
9. Login as Username: manager Password: nasadmin
10. Select the server (adminEVS) that you wish to manage from the menu (if more than one
local server is present, repeat these steps for each server)
11. At the Bali prompt, execute cluster-show (verify that the cluster is Robust).
12. Execute
quorumd show (verify that the SMU quorum device is configured).
13. If the Quorum is NOT showing Configured then do the following:
a. Execute
quorumd remove
b. Execute
quorumd add 192.0.2.1
c. Recheck the quorum status with quorumd show
To Next Page
Loading...
