Hitachi SPX-WKT2 - REMOTE CONTROLLER COMPONENTS; Display Panel Indicators; Operation Buttons and Functions

Operaon part
Return/Help Buon
To return to the previous screen.
When pressed at the normal mode
screen, will display Help Menu.
Eco Buon
By pressing this buon during
operaon, the unit performs the
eco operaon.
Menu Buon
To display Menu.
Seng Temperature Indicator
Filter Sign Indicator
It is indicated at the set period for
filter cleaning.
Operaon Lock Indicator
It is indicated when the operaon
lock funcon is set.
Timer Indicator
It is indicated when the mer
funcon is set.
Sleep Timer Indicator
It is indicated when the sleep mer
is set.
Eco Auto Off Indicator
It is indicated when the eco auto
off funcon is set.
Enter Buon
Cross Buon
 : Up buon
 : Down buon
 : Le buon
 : Right buon
Auto Swing IndicatorFan Speed Indicator
START/STOP Buon
(Operaon indicator lamp)
Press this buon to start operaon.
Press it again to stop operaon.
Operaon Indicator Lamp
It lights while the unit is operated,
and it blinks in an abnormal
condion.
Operaon Guide Indicator
Eco Mode and Forced Cooling
seng, and External device
operaon Indicator
Operaon Mode Indicator
Room Temperature Indicator
(Around Remote Controller)
Display part
• Do NOT press the buons hard or press with sharply pointed material such as a ball point pen.
The operaon part of the remote controller may be damaged.
• Make sure that the buons are pressed soly with fingers.
NOTE
The figure below shows all the indications for reference. The actual display during operation is different.
3. NAMES AND FUNCTIONS OF REMOTE CONTROLLER
- 4 -