If displayed language is changed, "Contact information"will be deleted.
NOTE
3 Select "Yes" by pressing "" or "" and press "OK". The setting
will be confirmed and the screen will return to the normal mode.
2 Press "" or "" to select the language and press "OK".
The confirmation screen will be displayed.
1 Select "Language" from the menu and press "OK".
This function is used to change the displayed language.
5. LANGUAGE SETTING
6 Select "Yes" by pressing "" or "" and press "OK". The setting will
be confirmed and the screen will return to the normal mode.
5 After the setting is completed, press "OK" and the confirmation
screen will be displayed.
3 Press "" or "" and select "yy/mm/dd/hh/mm".
4 Press "" or "" to change the setting. Press or keep
"" or "" to adjust numbers.
1 Press . Select "Remocon Settings" from the menu and press "OK".
2 Select "Adjusting Date/Time" from the menu and press "OK".
This function is used to adjust the date and time.
Periodic time setting is recommended. (Clock accuracy : Difference
within +/-5 seconds by month).
As for this remote controller, the clock can work up to 72 hours when
power failure occurs. Reset the date and time if the remote controller
remains without power supply for longer than 72 hours or main power
is OFF for long time.
4. ADJUSTING DATE/TIME
English
- 5 -
To Next Page
Loading...
