J
John BarkerAug 11, 2025
What to do if my Hitachi СР-Х2541WN shows no input signal?
- BbeasleytracyAug 11, 2025
If your Hitachi Projector displays 'no input signal,' confirm the signal input connection and check the status of the signal source.
To Next PageTo Next PageWhat to do if my Hitachi СР-Х2541WN shows no input signal?
If your Hitachi Projector displays 'no input signal,' confirm the signal input connection and check the status of the signal source.
What to do if my Hitachi СР-Х2541WN Projector receives an improper signal?
If your Hitachi Projector is receiving an improper signal, confirm the specifications for your projector or the signal source specifications.
What to do if COMPUTER IN2/MONITOR OUT port is selected as the picture input source even if MONITOR OUT is selected for COMPUTER IN2 on Hitachi СР-Х2541WN Projector?
To project the picture input to the COMPUTER IN2/MONITOR OUT port, select AUTO or SYNC ON/OFF in the dialog. If you do this, you cannot use the 021,725 287 function. Otherwise, select another port for picture input.
General| Native Resolution | 1024 x 768 (XGA) |
|---|---|
| Throw Ratio | 1.5 - 1.8:1 |
| Zoom Ratio | 1.2x |
| Display Technology | 3LCD |
| Dimensions | 320 x 85 x 245 mm |
| Weight | 3 kg |
| Keystone Correction | Vertical ±30° |
| Speakers | 16W (Mono) |
| Video Modes | NTSC, PAL, SECAM, HDTV |
| Aspect Ratio | 4:3 (Native), 16:9 |
| Projection Size | 30 - 300 inches |
| Lamp Type | UHP |
| Output Ports | VGA, Audio (Mini Jack) |
| Power Consumption | 220W (Eco Mode) |
| Noise Level | 37 dB (Normal) |
| Brightness | 2700 ANSI Lumens (Normal Mode), 1944 ANSI Lumens (Eco Mode) |
| Lamp Life | 5000 hours (Normal Mode), 6000 hours (Eco Mode) |
| Input Ports | VGA (x2), Composite Video, S-Video, HDMI, Audio (Mini Jack) |
