Need help?Do you have a question about the Hitachi TR-12 and is the answer not in the manual?
Procedure for securely inserting and clamping bits into the collet chuck.
Detailed steps for setting the desired cutting depth using the stopper pole.
Instructions on starting the cut, router feed direction, and rotation.
How to mount and use the straight guide for line-marked jobs.
Procedure for mounting and using the trimmer guide for beveling.
Procedure for securely inserting and clamping bits into the collet chuck.
Detailed steps for setting the desired cutting depth using the stopper pole.
Instructions on starting the cut, router feed direction, and rotation.
How to mount and use the straight guide for line-marked jobs.
Procedure for mounting and using the trimmer guide for beveling.
General| Type | Rotary Hammer |
|---|---|
| Voltage | 120V |
| Chuck Type | SDS-Plus |
| Power Source | Corded Electric |
| No Load Impacts Per Minute | 0-5, 500 IPM |
To Next Page
