Hitachi UT32-MH700A User Manual

39 pages

To Next Page

Color LCD Monitor

USER MANUAL

For future reference, record the serial number of your monitor.

SERIAL NO.

This serial number is located on the rear of the monitor.

Model Name

UT32-MH700A

UT37-MX700A

This is the image of the model UT32-MH700A.

READ THE INSTRUCTIONS INSIDE CAREFULLY.

KEEP THIS USER MANUAL FOR FUTURE REFERENCE

Questions and Answers:

M
mortonnathanSep 5, 2025
Why are the top of the unit and surface of the panel of my Hitachi UT32-MH700A heating up?
- S
  Sarah CurrySep 5, 2025
  If the top of your Hitachi Monitor and the surface of the panel are heating up, unplug the power cord for a while. This is not a malfunction.
A
Anthony GarciaSep 6, 2025
What to do if the buttons on both the remote control and control panel of my Hitachi Monitor do not work?
- T
  Tonya SuttonSep 6, 2025
  If the buttons on both the remote control and control panel of your Hitachi Monitor aren't working, unplug and reconnect the power cord. Hold down the Reset button on the control panel for over a second.
R
Rebecca RussoSep 7, 2025
Why can't some screen display sizes be switched in on my Hitachi Monitor?
- D
  David SerranoSep 7, 2025
  If some screen display sizes cannot be switched on your Hitachi Monitor, check the signal status by pressing the button on the remote control. The available screen display size varies depending on the current signal status.
M
markjonesSep 9, 2025
Why can't image be displayed from HDMI input on my Hitachi Monitor?
- P
  Paul DaltonSep 9, 2025
  If the image cannot be displayed from HDMI input on your Hitachi Monitor, verify that the cables are correctly connected and check the output format of the equipment.
M
Matthew RamirezSep 10, 2025
What to do if the image and audio are mismatched when in RGB or HDMI-DVI mode on my Hitachi UT32-MH700A?

General