Operation name Condition
Create pairs Both primary volume and secondary volumes must be assigned to
the Storage Administrator group permitted to manage them.
Split pairs Primary volumes must be assigned to the Storage Administrator
group permitted to manage them.
Suspend pairs
Resynchronize pairs
Release pairs
Access requirements for Thin Image
The following table specifies the resource access requirements for Thin Image
operations.
Operation name
Condition
Create LDEVs If LDEVs for Thin Image are created, the following must be assigned
to the Storage Administrator group that is permitted to manage
them.
• LDEV ID
• Pool VOL of the pool
Delete LDEVs If LDEVs for Thin Image are deleted, the following must be assigned
to the Storage Administrator group that is permitted to manage
them.
• LDEV ID
• Pool VOL of the pool
Create pools
Expand Pool
Volumes that are specified when creating or expanding pools must
be assigned to the Storage Administrator group that is permitted to
manage them.
All the volumes that are specified when creating pools must belong
to the same resource group.
Edit Pools
Delete Pools
Pool-VOLs of the specified pools must be assigned to the Storage
Administrator group that is permitted to manage them.
Create pairs Both primary volumes and secondary volumes must be assigned to
the Storage Administrator group that is permitted to manage them.
Split pairs Primary volumes must be assigned to the Storage Administrator
group that is permitted to manage them.
Suspend pairs
Resynchronize pairs
Release pairs
Access requirements for TrueCopy
The following table specifies the resource access requirements for TrueCopy
operations.
180 User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models