Hitachi VSP G800 System Administration Guide

Attribute Description Required / Optional Default value
• ldaps: Uses LDAP
over SSL/TLS.
• starttls: Uses
StartTLS.
auth.group.<realm_na
me>.port
A port number of the
LDAP server.
Must be between 1 and
65535.
1
Optoinal 389
auth.group.<realm_na
me>.searchdn
DN of the user for
searching.
2
Required None
auth.group.<realm_na
me>.searchpw
Password of the user
for searching. Specify
the same password
that is registered in the
LDAP server.
Required None
auth.group.<realm_na
me>.basedn
BaseDN when the
search for users
begins. When
searching, specify the
hierarchy DN, including
all the users, because
the targeted user for
the search is in a lower
hierarchy than the
specified DN.
2
Optional abbr
auth.group.<realm_na
me>.timeout
Number of seconds
before the connection
to the LDAP server
times out. Must be
between 1 and 30
seconds. When 0 is
specified, the
connection does not
time out until a
communication error
occurs.
1
Optional 10
auth.group.<realm_na
me>.retry.interval
Retry interval in
seconds when the
connection to the LDAP
server fails. Must be
between 1 and 5.
1
Optional 1
auth.group.<realm_na
me>.retry.times
Retry times when the
connection to the LDAP
server fails. Must be
between 0 and 3. 0
means no retry.
1
Optional 3
Notes:
1. If the specified value is not valid, the default value will be used.
196 User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models

Hitachi VSP G800 Specifications

General

Brand	Hitachi
Model	VSP G800
Category	Storage
Language	English