Hitachi VSP G800 User Guide

When you update the P-VOL and want to give it only to the specified users
(S-VOLs 5 and 6 in the figure), do the following:
1. Create cascaded pairs, and distribute data in the P-VOL. Assign users to
whom you want to distribute the updated data, and users to whom you
do not want to distribute the updated data to separate node volumes.
2. Delete the pairs in the node volume where you assigned users you do not
want to distribute the updated data to (S-VOL 1 in the figure).
3. Update the P-VOL.
Creating a new distributor with cloned pairs
32 Overview of Thin Image
Hitachi Thin Image User Guide for Hitachi Virtual Storage Platform G Series and F Series

Hitachi VSP G800 Specifications

General

Brand	Hitachi
Model	VSP G800
Category	Storage
Language	English