To Next Page
J
Jordan BeckerAug 27, 2025
What to do if Hitachi Heat Pump system controller cable disconnected?
- BBetty WiseAug 27, 2025
If the system controller cable is disconnected in your Hitachi Heat Pump, connect the cable.
What to do if Hitachi Heat Pump system controller cable disconnected?
If the system controller cable is disconnected in your Hitachi Heat Pump, connect the cable.
How to fix Hitachi YUTAKI transmission alarm?
If your Hitachi Air Conditioner displays a 'Transmission Alarm (Not outdoor unit detected)', it typically indicates a connection issue. Check the connectors for any looseness or breakage, as the cause may be a loose, disconnected, broken, or short-circuited connector.
What to do if Hitachi YUTAKI shows abnormal transmission between outdoor and indoor units?
If your Hitachi Air Conditioner shows 'Abnormal transmission between outdoor and indoor units', check the wiring, terminals, and PCB for faults. This issue can be caused by incorrect wiring, loose terminals, PCB failure, a tripped fuse, or the power supply being OFF.
Why does my Hitachi YUTAKI Air Conditioner activate safety device from excessively high discharge pressure?
If your Hitachi Air Conditioner activates the safety device due to excessively high discharge pressure, inspect the heat exchanger and refrigerant conditions. This activation can be caused by overload (obstruction of HEX, short circuit), a mixture of inert gas, or excessive refrigerant.
What causes Hitachi YUTAKI Air Conditioner to activate safety device from excessively low suction pressure?
If your Hitachi Air Conditioner activates the safety device from excessively low suction pressure, inspect refrigerant levels and piping for blockages. This issue is often due to a shortage or leakage of refrigerant, piping clogging, a closed expansion valve, or a locked fan motor.
How to troubleshoot Hitachi Air Conditioner hydraulic alarm flow and water pump malfunction?
If your Hitachi Air Conditioner displays a hydraulic alarm related to flow and water pump malfunction, check the water pump for proper operation and repair or replace it if defective. This alarm indicates that water flow is not detected in the hydraulic cycle or the pump is defective.
What to do if Hitachi Heat Pump fuse is blown?
If the fuse is blown in your Hitachi Heat Pump, it may be due to: * Accidental grounding for live cables. Remove the cause of the short circuit and replace the fuse. * Failure of compressor motor. Replace both the compressor and the fuse. * Failure of fan motor. Replace both the fan motor and the fuse.
How to fix Hitachi YUTAKI Air Conditioner activation of overcurrent protection?
If your Hitachi Air Conditioner activates overcurrent protection, inspect the inverter PCB and compressor operation. This can be caused by overload, overcurrent, failure of the Inverter PCB, a clogged heat exchanger, a locked compressor, or EVI/EVO failure.
How do I fix a 'Unit Capacity setting Error' on my Hitachi YUTAKI Air Conditioner?
If your Hitachi Air Conditioner displays a 'Unit Capacity setting Error', ensure correct capacity settings for both indoor and outdoor units. This error indicates a mismatch between the indoor and outdoor unit capacities.
How to correct Hitachi YUTAKI incorrect indoor unit number setting?
If your Hitachi Air Conditioner displays 'Incorrect indoor unit number setting', correct the indoor unit number settings. This issue can be caused by duplication of indoor unit numbers or the number of indoor units exceeding specifications.
General| Heating Capacity | 5.0 kW - 16.0 kW |
|---|---|
| Cooling Capacity | 5.0 kW - 16.0 kW |
| Energy Efficiency Class | A+++ |
| Refrigerant | R32 |
| Operating Temperature Range (Cooling) | 46°C |
| Noise Level (Indoor Unit) | 45 dB |
| Noise Level (Outdoor Unit) | 45 dB |
Covers critical safety precautions, including danger warnings and cautions for handling the heat pump system.
Emphasizes the importance of reading the manual, verifying installation information, and understanding Hitachi's policies.
Presents nominal capacity and performance data for YUTAKI S models under various operating conditions.
Details Energy-related Product (ERP) performance data for space heaters, including efficiency and energy classes.
Illustrates the operating temperature ranges for space heating, DHW, swimming pool heating, and space cooling.
Outlines essential safety precautions and maximum permitted concentrations for refrigerant leakage.
Lists alarm codes displayed on the remote control switch and their corresponding details for indoor units.
Provides a detailed table of indoor unit alarms, their origin, abnormality details, and main contributing factors.
Details abnormality types and main causes for outdoor unit alarms, categorized by code number and type.
Outlines essential maintenance tasks and precautions for licensed technicians, including power disconnection.
