OPERATOR'S STATION
1-96
Seat Belt
d
WARNING: Always use the seat belt when operating
the machine. Before operating the machine, be sure to
examine the seat belt and attaching hardware for any
failure. If any damage and/or wear is found, replace the
part concerned. Replace the seat belt every three years
regardless of its appearance.
Seat Belt
1. Seat belt (1) on this machine is a recoiling type.
2. Confirm that seat belt (1) is not twisted. Securely insert
the end of seat belt (1) into buckle (2).
f
NOTE: When trying to insert seat belt (1) into buckle (2), in
case the belt is suspended to extend and does not come out
further, fully retract the belt to the original position and try to
extend again.
3. Press button (3) on buckle (2) to unfasten seat belt (1).
M4GB-01-105
1
2
3
To Next Page
Loading...
Need help?
General
