OPERATOR'S STATION
1-75
Aftertreatment Device Regeneration Switch
Aftertreatment device regeneration switch (1) is a three-
position switch. It selects auto-regeneration, manual
regeneration and regeneration inhibited of the aftertreatment
device.
Manual Regeneration
(2)
: If the switch is in this position, the
manual regeneration is performed
when the aftertreatment device
regeneration request is displayed.
Auto Regeneration (3)
(Neutral)
: If the switch is in this position,
the aftertreatment device auto
regeneration is performed at regular
interval (60hrs).
Regeneration
Inhibited (4)
: Turn aftertreatment device
regeneration switch (1) in the
regeneration Inhibited position (4)
to prevent auto regeneration while
operating the machine in a dusty area
or indoors.
1
1
2
3
4
MNDF-01-023
MNDB-01-005
To Next Page
Loading...
Need help?
General
