HITEC X1 - Page 8

- 07 -
WARNING AND SAFETY NOTES
NiCd/NiMH
- Voltage level: 1.2V/cell
- Allowable fast charge current: 1C-2C (depends on the
performance of the cell)
- Discharge voltage cut-off level: 0.85V/cell (NiCd),
1.0V/cell(NiMH)
Li-ion
- Voltage level: 3.6V/cell
- Max. charge voltage: 4.1V/cell
- Allowable fast charge current: 1C or less
- Min. discharge voltage cut-off level: 2.5V/cell or higher
LiPo
- Voltage level: 3.7V/cell
- Max. charge voltage: 4.2V/cell
- Allowable fast charge current: 1C or less
- Discharge voltage cut-off level: 3.0V/cell or higher
LiFe
- Voltage level: 3.3V/cell
- Max. charge voltage: 3.6V/cell
- Allowable fast charge current: 4C or less
- Discharge voltage cut-off level: 2.0V/cell or higher
Pb
- Voltage level: 2.0V/cell
- (Lead-acid) Max. charge voltage: 2.46V/cell
- Allowable fast charge current: 0.4C or less
- Discharge voltage cut-off level: 1.75V/cell or higher