Need help?Do you have a question about the HITEC multi cahrger X4 AC Plus and is the answer not in the manual?
General| Output Channels | 4 |
|---|---|
| Battery Types Supported | LiPo, LiFe, LiIon, NiMH, NiCd, Pb |
| DC Input | 11-18V DC |
| LiPo/LiFe/Lilon Cell Count | 1-6 cells |
| NiCd/NiMH Cell Count | 1-15 cells |
| Pb Battery Voltage | 2-20V |
| Input Voltage | 100-240V AC |
| Charge Current Range | 0.1-6.0A per channel |
| Display | LCD |
| Charge Circuit Power | 50W per channel (200W total) |
| Discharge Circuit Power | 5W per channel |
| Discharge Current Range | 0.1-2A per channel |
| Output Power | 200W total |
| Cooling System | Fan |
Lists all items included in the charger package, such as cables, connectors, and adapters.
Specifies AC input voltage options (100-120V AC, 220-240V AC).
Refers to the main connection points for attaching batteries to the charger.
Indicates the socket for DC power input, typically from a car battery or power supply.
Describes ports for balancing Lithium cells and connecting external temperature sensors.
Explains software control for safety, malfunction detection, and user configuration.
Highlights built-in individual-cell voltage balancers for Lithium batteries.
Details Fast, Balance, and Storage charge modes for Lithium batteries.
Explains automatic charge termination using Delta-Peak voltage detection.
Allows setting limits for charging capacity and time to prevent overcharging.
Automatic termination based on battery temperature (requires optional probe).
Allows storing up to 10 custom charge/discharge configurations for quick recall.
Offers PC software for battery analysis via USB (requires adapter).
Covers unattended operation, environmental conditions, surface placement, and short-circuit avoidance.
Lists battery types that should not be charged or discharged by this unit.
Key questions and checks to perform before charging or discharging batteries.
Table showing nominal, max charge, storage voltages, and charge rates for various battery types.
Explains the charging process, current calculation, connection, and quality of leads.
Emphasizes proper connection of Lithium batteries and avoiding disassembly.
Explains the purpose of discharging, deep discharge avoidance, and memory effect.
Details how to power the charger using AC or DC sources.
Describes the first screen for Lithium battery setup or bypassing.
How to select default LiFe, LiIo, or LiPo battery types.
Setting a time limit for cell count verification to prevent errors.
Adjusting cutoff voltage for NiMH/NiCd charge termination.
Enabling and setting automatic temperature cutoff for battery protection.
Setting a delay between charge/discharge cycles for battery cooling.
Setting a timer to prevent overcharging if detection fails.
Setting a maximum charge capacity limit to stop charging.
Enabling or disabling audible beeps for button presses and mode changes.
Monitoring and setting a minimum input voltage to protect the source.
Explains the correct sequence to avoid short circuits when connecting batteries.
Illustrates correct connection of the balance lead to the charger for balancing.
How to check individual cell voltages when connected to the balancing port.
Specific parameters for charging/discharging Li-Ion batteries.
Specific parameters for charging/discharging Li-Po batteries.
Specific parameters for charging/discharging LiFe batteries.
Describes charging LiPo/Li-Ion/LiFe batteries without a balance lead.
Details balancing Lithium cells during charging via the balance port.
Explains fast charging for Lithium batteries, noting reduced capacity.
How to charge/discharge Lithium batteries to a specific voltage for storage.
Explains how error messages for cell voltage issues are displayed.
Setting discharge current and voltage cutoff for NiCd/NiMH batteries.
Setting up cycle sequence and number of cycles for NiCd/NiMH batteries.
Explains manual and auto modes for charging NiCd/NiMH batteries.
Setting discharge current and voltage cutoff for NiCd/NiMH batteries.
Setting up cycle sequence and number of cycles for NiCd/NiMH batteries.
Setting charge current and nominal voltage for Lead-Acid batteries.
Setting discharge current and nominal voltage for Lead-Acid batteries.
Steps for saving battery charge/discharge configurations.
Steps for loading previously saved battery configurations.
Lists common error messages like REVERSE POLARITY, SHORT ERR, etc.
Provides instructions and contact information for product repair and servicing.
To Next Page
