To Next PageTo Next Page
Need help?Do you have a question about the HITEC RDX1 and is the answer not in the manual?
General| Brand | HITEC |
|---|---|
| Model | RDX1 |
| Category | Battery Charger |
| Language | English |
Essential safety instructions and precautions for charger operation, including warnings and tips.
Lists battery types not to charge and crucial points to verify before commencing charging.
Details voltage and current limits for various battery types, and charging best practices.
Information on discharging functions and recommendations for LiPo/LiHV battery break-in cycles.
Identifies the main parts of the Hitec RDX1 charger and its included accessories.
Explains the function of each button on the charger's control panel for operation.
Details the RDX1's auto feature for automatic current setting and error handling.
Explains the ability to store and recall up to 10 charge/discharge profiles.
Highlights the built-in cell voltage balancer for charging lithium batteries.
Describes monitoring and balancing individual cells during the discharge process.
Lists compatible lithium battery types: Li-ion, LiPo, LiFe, and LiHV.
Outlines the four charging modes available for lithium batteries.
Monitors input voltage and sets limits for capacity, time, and temperature.
Covers cyclic charging, delta-peak detection, and automatic current limiting.
Features for checking battery voltage and controlling the charger via software.
Details the charger's capability to charge and store DJI Mavic Smart Batteries.
Instructions for connecting the charger to AC or DC power sources.
Procedure for safely connecting battery leads to the charger and battery.
Correctly connecting balance wires for lithium batteries to the charger.
Steps for initial charger setup and understanding the default operational mode.
Details operations like Charge, Discharge, Storage, Fast CHG, and Bal Charge for lithium types.
Details operations for NiMH, NiCd, and Pb batteries including Charge, Discharge, Re-Peak, and Cycle.
Specific operations available for charging and storing DJI Mavic batteries.
Guide to selecting battery type, cells, mode, and charge current.
How to set appropriate charge (C. Current) and discharge (D. Current) values.
Adjusting target voltage per cell and setting cut-off voltage for safety.
Using Cycle Mode, Cycle Count, Repeak Count, and Trickle functions for NiMH/NiCd batteries.
Final check of settings and understanding safety warnings before initiating charging.
How to start charging after battery check and view information during the process.
Instructions for connecting the DJI Mavic battery and turning it on.
How to select and start the Charge or Storage modes for DJI Mavic batteries.
Overview of default values for programmable user settings upon first power-on.
Option to change the low voltage warning threshold for DC input.
Setting maximum charge capacity and the built-in safety timer.
Configuring temperature limits for charging/discharging and rest time between cycles.
Adjusting delta-peak sensitivity and controlling balance connection.
Configuring key beep feedback, buzzer alerts, and LCD contrast.
Restoring factory defaults and displaying hardware/firmware versions.
Instructions for connecting the battery to check voltage and charge status.
Understanding the displayed main voltage, charge percentage, and cell voltages.
Messages related to reverse polarity, connection breaks, and input voltage issues.
Alerts for cell errors, wrong cell numbers, and high internal/external temperatures.
Warnings for exceeding charge capacity, time limits, or battery full status.
Details on using the 'Chargemaster' software for advanced charger control.
