HITEC RDX1 User Manual

14
Battery Type Operation Operation Description
NiMH
NiCd
CHARGE
The charger will charge NiMH and NiCd batteries
using the charge current set by the user.
AUTO CHG
In this program, the charger detects the condi-
tion of the connected battery and automatically
charges the battery.
Note: You should set the upper limit of the charge
current to avoid damage by excessive charging current.
The RDX1 may not be able to detect the charge capacity
of low resistance batteries.
DISCHARGE
This mode is for discharging a NiMH/NiCd battery
RE-PEAK
In re-peak charge mode, the charger can peak
charge the battery once, twice, or three times
in a row automatically. This is good for
conrming the battery is fully charged and for
checking how well the battery receives
fast charges.
CYCLE
Automatically charges/discharges the battery up
to 5 times. This process can enhance the perfor-
mance of NiMH/NiCd batteries.
Lead
Acid
Pb
CHARGE
This mode is for charging a Pb battery.
DISCHARGE
This mode is for discharging a Pb battery.
Mavic Pro
CHARGE
This mode is for charging a Mavic Pro battery
for ight.
STORAGE MODE
This program is for charging or discharging
a Mavic Pro battery which will not be used
again for an extended period.
Available Operations (continued)

HITEC RDX1 Specifications

General

Brand	HITEC
Model	RDX1
Category	Battery Charger
Language	English