Need help?Do you have a question about the HITEC RDX2 Mini and is the answer not in the manual?
General| Charge Power | 60W |
|---|---|
| Discharge Power | 5W |
| Charge Current | 0.1-6.0A |
| Discharge Current | 0.1~2.0A |
| Battery Types Supported | LiPo, LiFe, Li-ion, NiMH, NiCd, Pb |
| Cell Count | LiPo/LiFe/LiIon/LiHV: 1~6 cells NiMH/NiCd: 1~15 cells P(Pb): 2~20V |
| Balance Current | 300mA per cell |
| Input Voltage | 11-18V DC |
Critical safety precautions for charger and battery use.
Explains the meaning of various icons used in the manual.
Essential safety rules for charger operation, like not leaving unattended.
Lists specific battery types that should not be charged with this device.
Key points to verify before commencing any charging process.
Table detailing parameters for various battery types like LiPo, NiMH, etc.
Explains selecting the correct charge rate based on battery specifications.
Details importance of correct voltage and charging lead gauge for safety.
Identifies and labels the main parts and connectors of the RDX 2 Mini charger.
Explains the function of the LCD display, buttons, and LED indicators on the charger.
Highlights the AUTO function and two-way linkage system for safe and customizable operation.
Describes the ability to store and recall up to 10 charge/discharge profiles for convenience.
Explains the feature allowing experienced users to reset the charger's end voltage.
Details the capability to charge two batteries simultaneously, even with different chemistries.
Introduces special modes for charging Lead-based and AGM batteries in cold conditions.
Explains the intuitive Battery Icon and Percentage of Charge display for real-time status.
Highlights the built-in individual-cell balancer, eliminating the need for an external one.
States the charger's compatibility with various lithium battery types like LiPo, Lilon, LiFe, and LiHV.
Covers Re-Peak Mode and Delta-Peak Sensitivity for NiMH/NiCd battery charging.
Details checking battery voltage, internal resistance, and individual cell resistance.
Explains setting limits for charging capacity and processing time to protect batteries.
Instructions for connecting the charger to the AC power source (100-240V).
Emphasizes checking parameters and correct connection sequence to avoid damage.
Explains how to correctly connect the balance wire to the charger for balance charging.
Explains the function of each button on the charger: BATT/PROG, DEC, INC, ENTER/START.
Covers CHANNEL button usage and the process of changing parameter values.
Details initiating and terminating charging/discharging processes and navigating menus.
Describes using memory profiles for storing and recalling up to 10 battery charge/discharge parameters.
Explains the different operational modes available for various battery types (LiPo, NiMH, Pb).
Step-by-step guide for manually setting up a LiPo balance charge process.
Details initiating the charge program and verifying cell count accuracy before starting.
Explains how to monitor real-time charging status, including battery icon, voltage, and elapsed time.
Details monitoring end voltage, safety timer, and capacity cut-off settings during charging.
Guides on how to set up and save battery charge profiles for up to 10 different batteries.
Details the process of recalling previously saved battery memory profiles for quick setup.
Instructions on connecting the battery to the charger for measuring its resistance.
Explains how to interpret cell resistance and total resistance readings from the meter.
Lists common warning and error messages displayed by the charger and their meanings.
Explains how to set the integral safety timer to prevent overcharging or detect faulty batteries.
Describes setting the maximum capacity limit to automatically stop the charging process.
Details setting the delta-peak sensitivity for NiMH/NiCd battery charging termination.
Explains configuration options for button feedback sounds and operational alerts.
Instructions on how to restore the charger to its default factory settings.
Defines units of measurement like A, mA, Ah, and mAh used for current and battery capacity.
Explains the 'C' rating system for battery charge/discharge currents based on capacity.
Defines the voltage at which the charge process switches to a maintenance rate.
Defines the voltage at which the battery's discharge limit is reached.
Explains how to calculate the nominal voltage of different battery pack types based on cell count.
States that the RDX2 Mini complies with relevant CE directives and FCC Part 15 Subpart B.
Provides guidance on recycling electronic devices at the end of their service life.
Alerts users about chemicals known to the State of California to cause cancer.
Outlines the terms and conditions of the one-year limited warranty for the product.
Details what is not covered by the warranty and limitations on liability.
Provides step-by-step instructions for getting the Hitec charger serviced.
To Next Page
