23
Warning and Error Messages
In case of an error the screen will display the cause of error and
emit an audible sound.
REVERSE POLARRITY
Connection break
Reverse Polarity
CONNECT ERROR
CHECK MAIN POINT
BALANCE WIRES
NOT CONNECTED
INT. TEMP. TOO HI
OVER CHARGE
CAPACITY LIMIT
OVER TIME LIMIT
CONTROL FAIL
CELL ERROR
Incorrect polarity connected.
The battery is interrupted.
The battery connection is wrong.
The balance wires are not connected while
charging in balance mode.
The internal temperature of the unit goes too
high.
The battery capacity is more than the
maximum capacity which the user sets.
The charging time is longer than the maximum
charging time which the user sets.
Voltage of the battery pack is lower than 5V.
This charger can not charge battery whose
voltage under 5V.
The cell number is wrong.
To Next Page
Loading...
Need help?
General
