Need help?Do you have a question about the HITEC X4 AC Pro and is the answer not in the manual?
General| Input Voltage | 100-240V AC |
|---|---|
| DC Input | 11-18V DC |
| Battery Types Supported | LiPo, LiFe, LiIon, NiMH, NiCd, Pb |
| LiPo/LiFe/LiIon Cell Count | 1-6 cells |
| NiMH/NiCd Cell Count | 1-15 cells |
| Pb Battery Voltage | 2-20V |
| Display | LCD |
| Balance Port | JST-XH |
| Cooling System | Cooling fan |
General safety warnings and precautions for using the charger.
Never leave the charger unattended while it is connected to its power source.
List of all accessories provided with the Hitec X4 AC Pro charger.
Details on the charger's ability to connect and charge up to 4 batteries independently.
Information on AC/DC inputs and how power is distributed across channels.
Built-in cell voltage balancer for Lithium batteries.
Using the free 'Charge Master' software for PC control and firmware updates.
Details on 200W total AC power output and adjustable distribution.
Details on 300W total DC power output and fixed allocation.
Steps for powering on and setting up the charger for the first time.
Explanation of the charger's control buttons: Channel Select, Batt. Type/Stop, DEC, INC, Start/Enter.
Guide to setting up Lithium batteries in Charge, Balance Charge, Storage, and Fast Charge modes.
Setting charge current and selecting the correct number of Lithium battery cells.
Procedure to start and monitor Lithium battery charging.
Guide to setting up Lithium batteries for discharge.
Procedure to start and monitor Lithium battery discharging.
Guide to setting up NiMH/NiCd batteries for charging.
Setting charge current, discharge current, and voltage cut-off for NiMH/NiCd.
Using the charger's automatic detection for NiMH/NiCd charging.
Using re-peak and cycle modes to improve NiMH/NiCd battery performance.
Guide to setting up Pb (Lead Acid) batteries for charging.
Guide to setting up Pb (Lead Acid) batteries for discharging.
Details on additional data shown during Pb battery operations.
Setting the safety timer to prevent overcharging.
Setting the maximum charge capacity limit.
Setting the temperature limit for battery charging.
Setting the minimum DC input voltage to protect the charger.
Enabling or disabling the balance connection for Lithium batteries.
Loading the charger's factory default settings.
Procedure for saving charge/discharge profiles for batteries.
Procedure for loading previously saved battery profiles.
Entering battery voltage, current, and other parameters for saving.
Displays voltage of each cell in the connected battery pack.
Viewing total pack voltage and extreme cell voltages.
Displays internal resistance of each cell in the battery.
Viewing total internal resistance and extreme cell resistances.
Errors related to polarity, connection breaks, and port issues.
Errors related to individual cell voltages and cell count.
Errors related to internal/external temperatures and capacity/time limits.
Using the 'Charge Master' software for computer control and firmware updates.
Controlling and monitoring the charger via smartphone apps.
Disclaimer of liability for misuse or unauthorized operation.
Details of the one-year repair or replacement warranty.
Instructions for obtaining service and repairs for the charger.
Information on electronic waste recycling and regulatory compliance.
To Next Page
