Need help?Do you have a question about the HITEC X1 Pro and is the answer not in the manual?
General| Input Voltage | 11-18V DC |
|---|---|
| Charge Current Range | 0.1 - 10.0A |
| Discharge Current Range | 0.1 - 5.0A |
| NiCd/NiMH Battery Cell Count | 1-15 cells |
| LiPo/LiFe/LiIon Cell Count | 1-6 cells |
| Pb Battery Voltage | 2-20V |
| Number of Channels | 1 |
| Battery Types Supported | LiPo, LiFe, LiIon, NiMH, NiCd, Pb |
| Charge Power | 100W |
| Display | LCD |
| Balance Current | 300mA |
Lists critical safety warnings, including not leaving the charger unattended and avoiding combustibles.
Explains the meaning of warning, caution, tip, and note icons used in the manual.
Identifies and illustrates the main parts and connections of the X1 Pro charger.
Lists key technical data including input voltage, power, current ranges, and dimensions.
Highlights compact design, dual inputs, internal balancer, and optimized software.
Details the Hitec Charge Master software for advanced control, monitoring, and firmware updates.
Explains how to store, recall, and manage up to 10 battery profiles for quick setup.
Guides on Charge, Balance, Fast, Storage, and Discharge modes for lithium batteries.
Covers charge, auto-charge, discharge, re-peak, and cycle modes for NiCd/NiMH batteries.
Explains charge and discharge procedures for lead-acid batteries.
Details adjustable settings like Rest Time, Safety Timer, Capacity Cut-Off, and Beep/Buzzer.
Covers input voltage cut-off and external/internal temperature monitoring settings.
States the limitations of the charger's intended use and Hitec RCD USA's liability.
Provides instructions for obtaining service and repair for the Hitec charger.
To Next Page
