HITEC X1 Pro - Lipo Battery Meter

13
Fast and Storage Mode of Lithium Batteries
The X1 Pro features two styles of charging. “Fast” charge reduces
the charge duration while “Store” controls the nal voltage of
your battery to optimize your packs for long term storage and
maximum lifespan.
Cyclic Charging/Discharging
A battery can be cycled 1 to 5 times consecutively. This process is
good for refreshing and balancing your battery.
Battery Memory
For your convenience, the X1 Pro will store the data pertaining
to a specic charge program for up to 10 batteries. The ability to
save and load these settings for a specic battery saves the user
lots of time.
Terminal Voltage Control (TVC)
The charger allows the user to set the charge/discharge end voltage.
Warning
THIS IS FOR ADVANCED USERS ONLY. NEVER
EXCEED THE BATTERY MANUFACTURER'S
RECOMMENDATIONS.
LiPo Battery Meter
The user can check a battery’s total voltage, the highest voltage,
the lowest voltage and each cell’s voltage.
Re-Peak Mode of NiMH/NiCd Battery
In Re-Peak Charge mode, the charger can peak charge the bat-
tery 1-3 times consecutively. This is good for making certain the
battery is fully charged and for checking how well the battery
receives fast charges.
FEATURES (cont.)