Need help?Do you have a question about the HITEC RDX2 200 and is the answer not in the manual?
Highlights critical safety measures like not leaving the charger unattended and handling malfunctions.
Emphasizes selecting correct battery type and voltage to prevent fire or explosion.
Details the main visual output screen of the charger for monitoring operations and settings.
Explains the function of the metal scroll wheel for navigation and confirming selections.
Describes the button used to switch between charging ports A and B.
Identifies the physical ports for connecting batteries and balance leads.
Details the USB Type-C port for PC connectivity and charging mobile devices.
Notes the presence and function of the internal cooling fan.
Highlights the ability to charge two batteries simultaneously on independent circuits.
Explains the internal individual-cell voltage balancer for lithium batteries.
Notes support for charging various lithium battery types like LiPo, LiFe, Liio, and LiHV.
Describes modes like Balance Charge, Charge, Storage, and Terminal Voltage Control (TVC).
Covers features like Cyclic Charging, Re-Peak Mode, Delta-Peak, Resistance Meter, and Safety Timer.
Function of the button to switch between ports or exit menus.
Operation of the scroll wheel for menu navigation and setting adjustments.
Instructions for connecting the charger to AC or DC power sources.
Guidance on connecting LiPo, NiMH/NiCd, or Pb batteries safely.
Steps for initial setup after connecting a battery.
Overview of operations available for different battery types.
Guide to selecting the correct lithium battery type (LiPo, LiFe, Lilo, LiHV).
Instructions for selecting the number of cells in the lithium battery pack.
Choosing the charging mode: Balance CHG, Charge, Storage, or Discharge.
Setting the end voltage or delta voltage for lithium batteries.
Setting the appropriate charge current, typically 1C rate.
Initiating and stopping the charging process.
Guide to selecting NiMH or NiCd battery type.
Instructions for selecting the number of cells in NiMH/NiCd battery pack.
Choosing the charging mode: Charge, Re-Peak, Cycle_C_D, Cycle_D_C, or Discharge.
Setting the delta voltage for NiMH/NiCd batteries.
Setting the appropriate charge current for NiMH/NiCd batteries.
Initiating and stopping the charging process.
Guide to selecting the Pb (Lead-Acid) battery type.
Instructions for selecting the number of cells (S) for Pb batteries.
Choosing the charging mode: Normal, AGM Charge, Cold Charge, or Discharge.
Setting the end voltage for Pb batteries, only available in discharge mode.
Setting the appropriate charge or discharge current for Pb batteries.
Initiating and stopping the charging process.
Select the desired battery type for charging.
Set the number of cells corresponding to the selected battery type.
Choose the program to be performed (e.g., Balance CHG, Charge, Storage).
Set the cut-off voltage as per the selected task.
Set the charge or discharge current.
Initiate the current charging or discharging program.
Navigate back to the main menu screen.
Adjustments for Safety Timer, Max. Capacity, and Trickle Charge.
Options for Language, LCD Backlight, and Volume.
Configure Voltage, Current, and enable DC power output.
Measure battery voltage and internal resistance.
Access to Factory Settings, System Info, and System Upgrade.
Details regarding FCC rules and radio frequency energy regulations.
Information on the one-year limited warranty, service procedures, and repair contacts.
Highlights critical safety measures like not leaving the charger unattended and handling malfunctions.
Emphasizes selecting correct battery type and voltage to prevent fire or explosion.
Details the main visual output screen of the charger for monitoring operations and settings.
Explains the function of the metal scroll wheel for navigation and confirming selections.
Describes the button used to switch between charging ports A and B.
Identifies the physical ports for connecting batteries and balance leads.
Details the USB Type-C port for PC connectivity and charging mobile devices.
Notes the presence and function of the internal cooling fan.
Highlights the ability to charge two batteries simultaneously on independent circuits.
Explains the internal individual-cell voltage balancer for lithium batteries.
Notes support for charging various lithium battery types like LiPo, LiFe, Liio, and LiHV.
Describes modes like Balance Charge, Charge, Storage, and Terminal Voltage Control (TVC).
Covers features like Cyclic Charging, Re-Peak Mode, Delta-Peak, Resistance Meter, and Safety Timer.
Function of the button to switch between ports or exit menus.
Operation of the scroll wheel for menu navigation and setting adjustments.
Instructions for connecting the charger to AC or DC power sources.
Guidance on connecting LiPo, NiMH/NiCd, or Pb batteries safely.
Steps for initial setup after connecting a battery.
Overview of operations available for different battery types.
Guide to selecting the correct lithium battery type (LiPo, LiFe, Lilo, LiHV).
Instructions for selecting the number of cells in the lithium battery pack.
Choosing the charging mode: Balance CHG, Charge, Storage, or Discharge.
Setting the end voltage or delta voltage for lithium batteries.
Setting the appropriate charge current, typically 1C rate.
Initiating and stopping the charging process.
Guide to selecting NiMH or NiCd battery type.
Instructions for selecting the number of cells in NiMH/NiCd battery pack.
Choosing the charging mode: Charge, Re-Peak, Cycle_C_D, Cycle_D_C, or Discharge.
Setting the delta voltage for NiMH/NiCd batteries.
Setting the appropriate charge current for NiMH/NiCd batteries.
Initiating and stopping the charging process.
Guide to selecting the Pb (Lead-Acid) battery type.
Instructions for selecting the number of cells (S) for Pb batteries.
Choosing the charging mode: Normal, AGM Charge, Cold Charge, or Discharge.
Setting the end voltage for Pb batteries, only available in discharge mode.
Setting the appropriate charge or discharge current for Pb batteries.
Initiating and stopping the charging process.
Select the desired battery type for charging.
Set the number of cells corresponding to the selected battery type.
Choose the program to be performed (e.g., Balance CHG, Charge, Storage).
Set the cut-off voltage as per the selected task.
Set the charge or discharge current.
Initiate the current charging or discharging program.
Navigate back to the main menu screen.
Adjustments for Safety Timer, Max. Capacity, and Trickle Charge.
Options for Language, LCD Backlight, and Volume.
Configure Voltage, Current, and enable DC power output.
Measure battery voltage and internal resistance.
Access to Factory Settings, System Info, and System Upgrade.
Details regarding FCC rules and radio frequency energy regulations.
Information on the one-year limited warranty, service procedures, and repair contacts.
General| Brand | HITEC |
|---|---|
| Model | RDX2 200 |
| Category | Battery Charger |
| Language | English |
To Next Page
