18
Charging Your Battery
Now that you have set all the parameters for your battery you are ready to
execute the operation. Now would be a good time to check to make sure the
charge settings are correct and within the battery manufacturers recommen-
dations.
BEFORE YOU BEGIN CHARGING YOUR BATTERY, MAKE SURE YOU
HAVE READ AND UNDERSTAND ALL OF THE WARNINGS AND SAFETY
INFORMATION CONTAINED ON PAGES 37.
DURING CHARGING/DISCHARGING, THE BATTERY SHOULD BE
PLACED INSIDE A FIRE PROOF/RETARDANT BAG AND ON A FIRE
PROOF SURFACE, AWAY FROM OTHER COMBUSTIBLE OBJECTS.
Start the Process
Press and hold the ► button until you see “BATTERY CHECK...” fol-
lowed by the conrmation screen. This screen displays the number of cells
you set up as “R” and the number of cells detected by the processor as “S”.
If both numbers are identical, you may press and hold the START button
to conrm and begin charging. If these numbers do not match, press the
STOP button to return to the previous screen and carefully check the num-
ber of cells of the battery pack before proceeding.
Information Displayed During the Process
Use the INC. and DEC. buttons to scroll through the various information
displayed during the process.
Program Stop
During the charging process, press STOP to stop the process.
Program Complete
When the charging process is nished, an audible sound will be heard.
Warning
Caution
To Next Page
Loading...
