Hitron CGN - Document Conventions; Typographic Conventions; Customer Support

Weave Cable Modem Setup Guide
Revised: 2019-07-31
Step 5
Power on the modem. You can achieve this
by connecting the power into the modem
and then connect it to a wall power socket.
Step 6
Wait up to 5 minutes, then the lights on the modem should now show the following:
Power
Solid Green
Uplink (Up arrow house)
Solid Green or Blue
Downlink (Down arrow house)
Solid Green or Blue
Internet (@)
Solid Green
LAN (Computer symbol)
Black (Not on)
USB
Black (Not on)
WPS
Black (Not on)
Wireless
Solid Green or Blinking
www.weavenetworks.com 1-587-415-2900 support@weavenetworks.com Page 3 / 4