To Next PageTo Next Page
Need help?Do you have a question about the HKC HQ-120 and is the answer not in the manual?
General| Connectivity Technology | Wired |
|---|---|
| Platform | PC |
| Type | Gamepad |
| Model | HQ-120 |
| Connection | USB |
| Buttons | 12 |
| Interface | USB |
Outlines precautions to reduce risk of injury and equipment damage.
Precautions and requirements for installation in explosive environments.
Details ISO5211 bolt patterns and mounting bracket requirements.
Steps for setting the limit switches for open and close positions.
Explains the function of the torque switch and overload protection.
Procedure for adjusting the mechanical travel stops.
Procedure for re-calibrating the potentiometer if needed.
Details the AC and DC PCU boards and their specifications.
How to select input/output signals using DIP switches.
Explains deadband setting and its impact on positioning accuracy.
Explains deadtime setting for signal stability and noise prevention.
Steps for performing the auto-setting function for actuator configuration.
Configuration of fail-safe modes (fail close, fail open, fail stop).
Steps to diagnose unresponsive actuators, checking initial inspection and voltage.
Checks for voltage, torque, limit switch, and wiring issues.
Troubleshooting erratic operation by checking ambient temperature and duty cycle.
Safety warnings for installation in potentially explosive areas.
