EasyManua.ls Logo

HKS 700E - 7.8. Resistance of electrical equipment

HKS 700E
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operations Manual
HKS 700E
23
7.5. Spark plugs
Unscrew the plugs only with a cold engine.
Brush clean with a plastic bristle brush.
Do not use a brass brush or a steel wire brush for cleaning.
After 200 hours, replacement of the spark plugs is required.
Spark plug to use: HKS SUPER FIRE RACING
Torque the spark plugs with a cold engine only. (See Chapter 9.)
The shade of the spark plugs can give you the following information:
Light brown to white:
Spark plugs and carburetor adjustment is correct.
Velvety black:
Electrode gap too wide or the mixture is too rich.
Reduced air intake (air filter dirty) the proper exhaust gas temperature of
engine is not reached
Oily:
The spark plug is not firing or worn cylinder and piston rings.
Pearly or glazed:
Wrong type of spark plug or the Spark plug not torqued properly, the
mixture is a too lean or badly closing valve.
7.6. Exhaust system
Visually check for any damage and or leaks.
Check attach-flanges at exhaust parts on cylinder. Tighten the nuts if
necessary.
7.7. Misc. bolts and nuts
Check for tightness, re-torque if necessary (See chapter 9.)

Other manuals for HKS 700E