HKS CAMP2 - Page 22

To Next Page

To Previous Page

−20−

●LOGGING

・Up to 6 logged items can be displayed in a graph and digital meter indicator.

●PEAK

・PEAK Indication

When the PEAK button is pressed on the remote controller, the color of the digital meter

will change from white to green; then the peak value appears.

・Reset PEAK Value

To reset the peak value, press the ENTER button of the controller.

・Exit PEAK Value indication

To exit the PEAK value indication, press the BACK button of the controller.

●WARNING

・When the warning function is activated, the color of the value is changed from white to red,

and the buzzer sounds.

・For setting of this function, see the warning setting under the SET UP mode.

Advice

・WARNING functions only for the item on the screen. To see other items' warning setting,

first select the desired item to be shown on the screen.

・If selecting the same item, the same data is shown on each screen.

・When the ignition is turned off, the logging data will be automatically deleted.

・The time axis can be set using the controller's directional arrow buttons as follows:

Up Down

Right Right (Press and hold)

Left Left (Press and hold)

: Move every -20 sec.

: Move every +0.2 sec.

: Move every -0.2 sec.

: Move every +20 sec.

: Move every +2 sec.

: Move every -2 sec.