Pn 32 Parameter management：1—3
1 modification enable 2 modification disable
3 initialization for 400Hz parameters
4 read OEM initialization parameter
5 write OEM initialization parameter
6 initialization for 50Hz parameters
Note: the password for the OEM parameter is: 61633
Pn 33 Software version
Pn 34 Auto recover while lost power suddenly
0 disable this function
99 means do auto recover in infinite time, starting from
low frequency
Other value：
If indicator displays LU-X(any code) during runtime
and power source recovers in 2 seconds, VFD would
start up again and reduce runtime frequency with
magnitude of under voltage time(s) multiply
frequency of this component(Hz).
The maximum power lost time is 2.5s. Beyond this time,
it would be seen as over voltage without any autorecover.
Pn 35 Production date
To Next Page
Loading...
Need help?
General
