– 3 –

2345678901234567890123456789012123456789

23456789012345678901234567890121234567890123456789012345678901212345678901

Installation, Operation, and Care of

MODEL D340 MIXERS

SAVE THESE INSTRUCTIONS

GENERAL

The D340 Mixer is a medium duty mixer which develops 1

1

/2 horsepower and features a timer, thermal

overload protection, and a #12 attachment hub as standard equipment. A variety of agitators are available

for use on either the standard 40 quart bowl or the optional 30 quart bowl. A special 20 quart bowl and

agitators are available options.

Bowl Guard is standard equipment on all D340 models.

Programmable Timer Controller is optional on D340 models.

A variety of attachments and accessories are available for all mixers. These are described in a separate

Use and Applications Handbook

which is furnished with each mixer.

INSTALLATION

UNPACKING

Immediately after unpacking the mixer, check for possible shipping damage. If this machine is found to be

damaged, save the packaging material and contact the carrier within 15 days of delivery.

Prior to installation, test the electrical service to assure that it agrees with the specifications on the machine

data plate.

LOCATION

Place the mixer in its operating location. There should be adequate space around the mixer for the user

to operate the controls and install and remove bowls. The area above the mixer should allow the top cover

to be removed for routine maintenance and servicing.

Holes are provided in the base for permanent bolting to the floor, although this is not necessary in normal

installations. Four plastic plugs are supplied with the mixer to plug these holes if they are not used.

ELECTRICAL CONNECTION

Hobart D340 User Manual

Other manuals for Hobart D340