Hobbico Flyzone Sensei FS User Manual

© 2015 Flyzone, a Hobbico company. FLZA3030RTF/3034RxR Mnl
SPECIFICATIONS
Wingspan:
58 in
[1475mm]
Wing
Area:
566 in
2
[36.5 dm
2
]
Weight:
3.25 lb
[1470 g]
Wing
Loading:
13 oz/ft
2
[40 g/dm
2
]
Length:
48 in
[1220 mm]
Radio:
6-channel
(required)
READ THROUGH THIS MANUAL BEFORE STARTING CONSTRUCTION. IT CONTAINS IMPORTANT
INSTRUCTIONS AND WARNINGS CONCERNING THE ASSEMBLY AND USE OF THIS MODEL.
WARRANTY
Hobbico guarantees this kit to be free from defects in both
material and workmanship at the date of purchase. This warranty
does not cover any component parts damaged by use or
modification. In no case shall Hobbico’s liability exceed the
original cost of the purchased kit. Further, Hobbico reserves
the right to change or modify this warranty without notice.
In that Hobbico has no control over the final assembly or material
used for final assembly, no liability shall be assumed nor
accepted for any damage resulting from the use by the user of
the final user-assembled product. By the act of using the
user-assembled product, the user accepts all resulting liability.
If the buyer is not prepared to accept the liability associated
with the use of this product, the buyer is advised to return
this kit immediately in new and unused condition to the
place of purchase.
To make a warranty claim send the defective part or item to
Hobby Services at the address below:
Hobby Services
3002 N. Apollo Dr. Suite 1
Champaign IL 61822 USA
Include a letter stating your name, return shipping address, as
much contact information as possible (daytime telephone
number, fax number, e-mail address), a detailed description of
the problem and a photocopy of the purchase receipt. Upon
receipt of the package the problem will be evaluated as quickly
as possible.
INSTRUCTION MANUAL
®
™
™
S
PECIFICATION
S
Wi
ngspan
:
58
i
n
[
1475mm
]
W
in
g
A
r
ea:
566
i
n
2
[
36.5 d
m
2
]
W
e
ig
ht
:
3
.2
5
l
b
[
1470
g]
Wing
Load
i
ng
:
1
3
oz
/
f
t
2
[40 g/d
m
2
]
L
engt
h:
4
8
i
n
[
12
2
0
mm
]
Radio:
6
-channel
(r
eq
ui
re
d)
I
N
S
T
R
U
C
T
I
O
N
M
A
N
U
A
L
®
™

Hobbico Flyzone Sensei FS Specifications

General

Brand	Hobbico
Model	Flyzone Sensei FS
Category	Toy
Language	English

Summary

WARRANTY

Hobbico Warranty Information

Covers defects, exclusions, and liability limits for the purchased kit.

Warranty Claim Procedure

Details on sending defective parts and required information for warranty claims.

INTRODUCTION

About the Sensei

Introduces the Sensei and its gyro stabilization system for enhanced learning.

SAFETY PRECAUTIONS

Model Safety Guidelines

Emphasizes treating the model as a sophisticated tool, correct assembly, and seeking experienced pilots.

Manufacturer Disclaimer

States manufacturer provides quality kit but user builds and flies it, with no performance guarantee.

AMA

Academy of Model Aeronautics

Information about AMA membership benefits and contact details for model aviation.

ADDITIONAL ITEMS REQUIRED

Radio Control System

Details the required transmitter and receiver for the Sensei Rx-R.

Battery and Charger

Specifies battery type and charger for the Sensei RTF and Rx-R versions.

Assembly Tools

Lists common hobby tools needed for assembly.

BATTERY PREPARATION

Charge the Battery

Provides step-by-step instructions for charging the flight battery.

Battery Charging Precautions

Safety advice for charging LiPo batteries, including temperature checks.

Battery Recycling

Guidance on proper disposal of used batteries according to local laws.

ORDERING REPLACEMENT PARTS

Product Support Contact

Information for ordering parts directly from Flyzone/Hobbico via web, phone, or email.

Replacement Parts List

A list of order numbers and descriptions for available replacement parts.

ASSEMBLE THE SENSEI

Install the Main Landing Gear

Step-by-step instructions and image for attaching the main landing gear.

Install the Vertical and Horizontal Stabilizer

Instructions for attaching the tail assembly to the fuselage.

Connect the Rudder and Elevator Controls

Detailed steps for connecting control linkages using pushrods and connectors.

Install the Wing Joiner

Instructions for inserting the wing joiner and connecting servos.

RX-R VERSION

Install the Receiver

Guide for connecting the receiver and WISE gyro unit for the Rx-R model.

TTX650 Programming

Instructions for programming the Tactic TTX650 transmitter for mode and recovery switches.

RADIO SYSTEM

Check the Radio System

Steps to verify transmitter and receiver functionality and control directions.

Bind the Receiver

Procedure for binding the receiver to the transmitter for initial setup.

Motor Brake Function

How to deactivate the ESC's motor brake function.

Check the Control Throws

Verifying control surface movement range for proper airplane handling.

Recommended Control Surface Throws

Specifies acceptable throw distances for elevator, rudder, and aileron.

Check the Stabilization System

WISE Gyro Mode Check

Verifies the direction of WISE gyro stabilization for safe operation.

Rudder Direction Check

Verifying rudder response to yaw changes for proper gyro correction.

Mount the Propeller

Propeller Installation

Steps for installing the propeller, washer, and spinner securely.

Check the C.G. (Center of Gravity)

C.G. Location and Check

How to find and verify the model's center of gravity for balanced flight.

Adjusting Center of Gravity

Instructions for adding weight to achieve proper balance and flight characteristics.

Important ESC Information

ESC Safe Start Function

Explains the ESC's safe start feature and motor arming process.

WISE GYRO STABILIZATION SYSTEM

Gyro Stabilization Modes

Describes the Beginner, Intermediate, and Advanced modes of the WISE gyro.

Recovery Switch Function

Explains how the recovery switch returns the plane to level flight.

Climb Assist Feature

Details the climb assist function for automatic takeoff and climb.

COWL REMOVAL

Cowl Removal Procedure

Steps for removing and reattaching the motor cowl, including weight considerations.

GET THE MODEL READY TO FLY

Identify Your Model

Importance of labeling the model with owner information for safety.

Find a Suitable Flying Site

Advice on selecting an appropriate and safe flying location.

Know Your Frequency

Caution regarding 72MHz frequency usage and potential interference.

Perform a Range Check

Procedure for testing radio system range to detect potential problems.

Monitor Your Flight Time

Tips for managing battery life and flight duration using a timer.

Takeoff Procedure

Step-by-step guide for taking off in BEGINNER mode.

FLYING

Flight Techniques

Guidance on flying at safe altitude and maintaining direction.

Landing Procedure

Instructions for landing the Sensei, including the flare technique.

Before Your Next Flight

Post-Flight Checks

Advice on charging battery, inspecting model, and planning next flight.

Improving Your Piloting Skills

Mode Progression

Guidance on transitioning from Beginner to Advanced flight modes.

Trimming

Adjusting Control Trims

How to trim the aircraft for stable flight in Advanced mode.