Built-in devices
10-19
Operation
• Open the glass cover
j
.
• Turn the rotary switch
k
of the burner you wish to use to
the ignition position (large ame) and press.
• Ignite the burner by pressing the igniter
l
.
• Continue to press the rotary switch for a further 5-10
seconds to ensure that the automatic ame guard takes
effect.
• Release the rotary switch
k
and turn to the desired set-
ting (large or small ame).
• If ignition was unsuccessful, repeat the procedure.
Use oven gloves or potholders when handling hot pots,
pans or similar objects. You may be burned!
Never store easily ammable objects such as dishtowels,
serviettes, etc. near the cooker. Danger of re!
• To turn off the gas ame, turn the rotary switch back to
the “0” position
• Close the main gas stop valve on the gas cooker.
After cooking, leave the glass covering open until the
burner no longer emits heat. Otherwise, the glass plate
could explode.
2
1
3
To Next Page
Loading...
