WWW.HOBBYEAGLE.COM 7 / 16
About Failsafe
Receiver Failsafe Most receivers will enter Failsafe mode in case of signal loss from the
transmitter. In such conditions the gyro will benefit from the native Failsafe/Hold functions of
the receiver. Always ensure that the Failsafe settings are properly set in the transmitter.
Gyro Failsafe The gyro also provides the gyro-level Failsafe function when the connection fails
from the receiver. When the function is activated, the LED will keep flashing Red slowly and all
servos will move to their initial positions at startup, including AUX1 and AUX2 channels, gyro
will switch to Normal mode automatically and remote master gain will be disabled.
OUTPUT CONNECTION
Output Functions
A3S4 provides 5 customized PWM output channels, including OUT1 to OUT5, of which the function can
be specified by user. The available functions are shown in the table below.
To Next Page
Loading...
Need help?
General
