2
About the Design of your Kayak
Sit-on-top Cockpit
Hobie Mirage Kayaks are open-top cockpit designs. This
allows the kayaker to enter and exit the kayak easily
from the shore, dock or water. Scupper hole(s) make the
kayak self-bailing. The design also eliminates the need
to perform an “Eskimo roll” (advanced kayak technique).
The contoured seat is fitted with an adjustable backrest for
added comfort.
Hull Design
The long center “keel” area encourages the kayak to track
straight when pedaling, paddling and coasting. Under
moderate paddling conditions, the wider “shoulder” area
of the hull rides high at the surface of the water without
compromising speed. If the kayak is fully loaded with gear
or is being paddled and braced in rough conditions, the
“shoulder” areas provide secondary buoyancy and stability.
Maneuverability
Most new Mirage Kayaks come with the patented Twist- and-
Stow rudder system. This system comes pre-installed by our
factory. This new rudder is designed to flip out of the way
during land transport and has an optional larger rudder blade
for more turning authority.
Scupper Hole(s)
Drain holes (scuppers) in the cockpit or cargo well allow any
water that enters the cockpit to immediately flow back out.
Graphics
Graphics are molded into the kayaks, so they will not peel or
flake off for the life of the boat.
To Next Page
Loading...
Need help?
General
