•
p14
Replacing the fuses
• Unplug the power cord from the power supply.
• Locate the fuse compartment on the rear panel.
• Use a screwdriver to pry out the fuse compartment.
There are two fuses in the compartment. Check and
replace any blown fuses with a fuse of the same
size and ratings.
• FUSES (2); 250 V 3.15 A 5 × 20 mm fast blow.
CAUTION! Turn the mains
power supply switch off and
detach the power cord before
replacing input mains fuses!
To Next Page
Loading...