I 1235_1236 - 06/17 - Ver. 01
Use and maintenance manual
EN
ENGLISH
General Index
1. FOREWORD 3
1.1 GENERAL 3
1.2 PURPOSE OF THE MANUAL 3
1.3 WHERE AND HOW TO KEEP THE MANUAL 4
1.4 MANUAL UPGRADES 4
1.5 COLLABORATION WITH USERS 4
1.6 MANUFACTURER 4
1.7 MANUFACTURER’S RESPONSIBILITY AND WARRANTY 4
1.7.1 Terms of warranty 5
1.8 TECHNICAL ASSISTANCE SERVICE 5
1.9 COPYRIGHT 5
2. MACHINE DESCRIPTION 6
2.1 TECHNICAL SPECIFICATIONS 6
2.2 DIMENSIONS 6
2.3 COMPONENTS 6
3. STARTING 8
4. CORRECTION PLANE IDENTIFICATION 10
5. CONTROL PANEL 11
6. USE OF THE WHEEL BALANCER 12
6.1 STANDARD BALANCING (CLIP-ON COUNTERWEIGHTS) 12
6.1.1 Wheel dimensions setting 12
6.1.1.1 IWA 13
6.1.2 Result of the measurement and weight application 14
6.2 BALANCING WITH ADHESIVE WEIGHTS (ALU) 15
6.2.1 Wheel dimensions setting 15
6.2.2 Result of the measurement and weight application 16
6.3 BALANCING WITH A MIX OF ADHESIVE AND CLIP-ON WEIGHTS (STATIC BALANCING) 17
6.4 STATIC UNBALANCE 18
6.4.1 OPB 18
6.5 HIDE THE ADHESIVE WEIGHTS (SPLIT) 18
6.6 SPOTTER 19
6.7 AUTOMATIC MINIMIZATION OF STATIC UNBALANCE 19
6.8 EP – EXTERNAL PLANES 20
6.8.1 EP tolerance 20
6.9 WEIGHTLESS CORRECTION METHOD 20
6.10 UNBALANCE OPTIMIZATION 21
7. SETUP 22
7.1 MENU ACCESS DIAGRAM 22
7.2 SELF-DIAGNOSTICS 23
7.3 BALANCING MACHINE CALIBRATION 23
To Next Page
Loading...