33
ENGLISH
Use and maintenance manual
11. Spare parts
11.1 IDENTIFICATION AND ORDERING METHOD
The various parts can be identified using the exploded drawings, the electrical drawings and diagrams in the ma-
chine technical file which is archived by the Manufacturer to which a request can be made.
For off-the-shelf parts, the technical manuals or the supplier’s original documents can be provided if the Manu-
facturer deems this to be useful.
If not supplied, this documentation is also included in the machine Technical File, archived by the Manufacturer,
as regards by Ministerial
Decree 2006/42/CE.
In this case, contact the Technical Service to identify the required piece.
If the required pieces are not in any position or they cannot be identified, contact the Technical Service, specifying
the type of machine, its serial number and year of construction.
This information is indicated on the machine identification plate.
12. Attached documentation
If not supplied, this documentation is included in the Technical File of the machine, archived by the Manufacturer.
In this case, contact the Technical Service for detailed information concerning the machine.
Spare parts/Attached documentation
To Next Page
Loading...