Gimbal Mode Button
Tap the button to switch
dierent working modes
with light on.
PF (Pan Follow)
Default mode, tilt & roll axis both
locked, camera is able to move to
left or right smoothly.
Roll axis locked, camera is able to
move to left/right, and tilt up/down.
PTF (Pan & Tilt Follow)
The camera stays in its current orientation.
L (All Locked)
All Follow - Tilt axis, roll axis and pan axis all
follow the movement of the gimbal.
Inception - Hold the gimbal horizontally and
push joystick to left or right.
POV (AlI Follow & Inception)
08EN
To Next Page
Loading...
