Vehicle care 163
1. Turn the ignition off.
Caution
Extremely small amounts of
contamination can cause steering
system damage and cause it to
not work properly.
Do not allow contaminants to
contact the uid side of the
reservoir cap/dipstick or to enter
the reservoir.
2. Rotate the power steering uid
reservoir cap anti-clockwise and
remove.
3. Add the required amount of
power steering uid.
Do not overll the reservoir.
If the power steering uid requires
regular topping up, contact a
Holden Dealer.
Caution
Do not operate the vehicle
without the required amount of
power steering uid. Damage to
the power steering system may
occur.
Washer uid
Check the uid level weekly.
Adding washer uid
1. Lift the front of the cap up.
Use the correct amount of
washer uid additive. Refer to
a Holden Dealer.
2. Secure the cap.
Note
Do not use ordinary soap or
detergent as they froth up and
damage the wiper rubbers.
To Next Page
Loading...
Need help?
General
