Vehicle care 169
Number plate lamp
1. Prise the lamp out with a
screwdriver.
Note
Wrap tape around the
screwdriver tip and take care not
to damage the paintwork.
2. Remove the bulb housing by
pulling downwards.
Do not pull on the cable.
3. Rotate the bulb holder anti-
clockwise to disengage.
4. Remove the bulb from the holder.
5. Insert a new bulb.
6. Insert the bulb holder into
the bulb housing and rotate
clockwise.
7. Insert the bulb housing and
secure using a screwdriver.
8. Check lamp operation.
Interior lamps
Load compartment lamp
1. Using a at-blade screwdriver,
prise the lamp assembly
outwards.
To Next Page
Loading...
Need help?
General
