EasyManua.ls Logo

HOLDEN Trailblazer RG MY18 - ISOFIX Child Restraint; Systems

HOLDEN Trailblazer RG MY18
298 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Holden Trailblazer Owner Manual (GMSA-Localising-Australia-11475197) -
2018 - crc - 3/15/17
Seats and Restraints 53
Warning (Continue d)
purchase a child restraint which
carries the appropriate Standards
Australia sticker of approval.
Australian States and Territories
and New Zealand have laws
restricting the seating of children
in the front passenger seat. In
most jurisdictions, children under
4 years should not be seated in
the front passenger seat. Check
your local road safety regulations
before seating a child in the
front seat.
Where legally allowable, you may
install a forward-facing child
restraint in the front seat, but
always move the passenger seat
as far back as it will go.
Child restraint anchorages are
designed to withstand only those
loads imposed by correctly fitted
child restraints. Under no
circumstances are they to be
(Continued)
Warning (Continue d)
used for adult seat belts,
harnesses, or for attaching other
items or equipment to the vehicle.
Child restraints located in the
second row must be attached to
the child restraint anchorage
points, located behind the second
row rear seatbacks.
Do not place child restraints on
the third row seats.
Note
If unsure about installing a child
restraint, contact an approved
restraint fitting station or a Holden
Dealer.
ISOFIX Child Restraint
Systems
Fasten vehicle-approved ISOFIX
child restraint systems to the
ISOFIX mounting brackets.
Note
Ensure that seat belt buckles are
placed out of the way of the
child seat.
ISOFIX mounting brackets are
indicated by a label on the
seatback, as shown. In addition to
the ISOFIX mounting, fasten the

Table of Contents

Related product manuals