HOLDEN VE Commodore II Series User Manual

Black plate (77,1)
Holden WM Caprice Owner Manual (MY12.5) - 2012 - CRC 1st Edition - 6/28
/
12
Infotainment System 7-77
5. Choosea4digitcodeandenter
it when Enter 4 digit code is
displayed.
6. Touch OK.
7. Enter the 4 digit code into the
mobile phone to pair it.
Pairing completed wil l be
displayed.
Pairing a Bluetooth
®
device with
the infotainment system
1. Switch the Bluetooth
®
device on.
2. Press CONFIG.
3. Touch t he Bluetooth tab.
4. Touch Pair new device.
Searching for Bluetooth
devices is displayed.
5. Touch Refresh.
The detected Bluetooth
®
devices
are displayed.
6. Touch the Bluetooth
®
device.
Pairing device... is displayed.
Enter code XXXX into device is
displayed.
7. Enter the displayed code into the
mobile phone to start pairing.
If pairing failed, Pairing failed is
displayed.
If pairing was successful,
Pairing completed is displayed.
8. Pairing is now completed.
AdduptofivedevicestotheLast
paired devices list.
Deleting a Bluetooth
®
device
1. Press CONFIG.
2. Touch t he Bluetooth tab.
3. Touch Paired devices.
A list of paired devices is
displayed.
4. Touch Delete.
5. Touch t he device to be deleted.
Delete the paired device
<Device Name> is displayed.
6. Touch OK.
The device will be deleted from
the Last paired devices list.
Connecting another Bluetooth
®
device
Connect an extra Bluetooth
®
device
and disconnect the currently paired
device without deleting the device
from the Last paired devices list.
1. Switch on the extra Bl uetooth
®
device to be paired, and prepare
it for pairing.
2. Press CONFIG.
3. Touch t he Bluetooth tab.
4. Touch Paired devices.
The current connection is
marked with an asterisk on the
right hand side.

HOLDEN VE Commodore II Series Specifications

General

Brand	HOLDEN
Model	VE Commodore II Series
Category	Automobile
Language	English