Black plate (9,1)
Holden WM Caprice Owner Manual (MY12.5) - 2012 - CRC 1st Edition - 6/28
12
Driving and Operating 9-9
To enable A/S mode:
1. Move the gear lever to
position D.
2. Push the lever to the left.
3. Shift to the required gear:
To shift up a gear, briefly pull the
lever rearwards (+) and
release it.
To shift down a gear, briefl y push
the lever forwards (–)and
release it.
After changing the gear and
releasing the gear lever, it returns to
the centre position on the left side of
the selector.
Do not hold the gear lever in the +
or – position.
The Active Select On animation
appears on the display for
2 seconds.
At the bottom of the display, M and
the currently selected gear appears
as long as A/S mode is selected.
When shifting up or down, the
selected gear (1, 2, 3, 4, 5,or6)is
also animated on the display.
The animation appears on the
display for 2 seconds after the gear
is selected.
Note:
.
The transmission will shift to a
selected gear only if the engine
speed is within a suitable range.
If not suitable, Shift Denied will
be disp layed and the
transmission will not shift gears.
To Next Page
Loading...
Need help?
General
