EasyManuals Logo

HOLDEN VE Commodore II Series User Manual

HOLDEN VE Commodore II Series
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #250 background imageLoading...
Page #250 background image
Black plate (4,1)
Holden WM Caprice Owner Manual (MY12.5) - 2012 - CRC 1st Edition - 6/28
/
12
10-4 Vehicle Care
Push up on the rear edge of the
release catch and lift. Gas struts
automatically take over to lift and
hold the bonnet in the open position.
Closing
{
WARNING
To avoid injury and/or damage to
the vehicle, check each time,
before the bonnet is closed, that
the contact area is unobstructed.
Lower the bonnet and allow it to
drop into the catch. Check that the
bonnet is engaged.
{
WARNING
If while driving you notice that the
bonnet is not properly closed, pull
the vehicle over to the side of the
road at the earliest possible
moment and close the bonnet
correctly.
Note:
.
If the wiring of the bonnet switch
is damaged or tampered with, it
will be detected by the vehicle
control system . The alarm will
sound when the alarm system is
armed.
.
If the bonnet is not engaged
when the vehicle is locked,
A
will flash immediately. Unlock the
vehicle, close the bonnet
securely, and relock.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HOLDEN VE Commodore II Series and is the answer not in the manual?

HOLDEN VE Commodore II Series Specifications

General IconGeneral
BrandHOLDEN
ModelVE Commodore II Series
CategoryAutomobile
LanguageEnglish

Related product manuals