EasyManuals Logo

HOLDEN VE Commodore II Series User Manual

HOLDEN VE Commodore II Series
340 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #259 background imageLoading...
Page #259 background image
Black plate (13,1)
Holden WM Caprice Owner Manual (MY12.5) - 2012 - CRC 1st Edition - 6/28
/
12
Vehicle Care 10-13
AB
V8 Engine
1. Check the coolant reservoir
level (B). Add coolant if low. See
Engine Coolant on page 10‑ 9.
{
DANGER
Do not remove the radiator c ap if
the engine and radiator are stil l
hot. Scalding fluid and steam can
be blown out under pressure,
which could cause serious burns.
(Continued)
DANGER (Continued)
Remove the engine cover if
required. See Engine Cover on
page 10‑6.
2. Locate the radiator cap (A).
3. Cover the cap with a thick cloth
and rotate slowly anticlockwise
to remove.
{
CAUTION
Do not spill coolant on the
veh icle’s exterior su rfaces as it
can damage the paintwork. If you
do, wash it off immediately.
4. As well as adding coolant to the
coolant reservoir, add coolant
directly through the radiator cap
opening until full.
5. Wait 30 seconds for the coolant
to settle.
6. Add more coolant if the level
drops.
{
CAUTION
Take care not to spill coolant on
the accessory drive belts.
If a spill occurs, rinse the belts
immediately wi th fresh water.
7. Start the engine.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HOLDEN VE Commodore II Series and is the answer not in the manual?

HOLDEN VE Commodore II Series Specifications

General IconGeneral
BrandHOLDEN
ModelVE Commodore II Series
CategoryAutomobile
LanguageEnglish

Related product manuals