Driving and operating 211
Ignition positions
Warning
Do not turn the engine off while
the vehicle is moving as there
will not be any power assist for
brakes or steering.
Never remove the key while the
vehicle is moving, as this will lock
the steering.
LOCK: When the key is in the LOCK
position, some electrical accessories
and the engine are off.
The key can only be inserted and
removed from the LOCK position.
The engine is automatically disabled
shortly after removing the key from
the ignition.
The steering wheel is automatically
locked when the key is removed.
To release the steering lock,
re-insert the key and turn it towards
the front of the vehicle. If still locked,
turn the steering wheel slightly to
the right or left while turning the key
towards the front of the vehicle.
ACCESSORIES: When the key is
in the ACCESSORIES position, the
audio system and wipers operate.
ON: When the key is in the ON
position, the engine is ready to start
and all electrical systems are active.
Warning lamps will illuminate.
See Warning lights, gauges and
indicators on page 74 .
Do not leave the switch in the
ON position for a long time, unless
the engine is running, otherwise the
vehicle’s battery will discharge.
START: Turn the key to the START
position momentarily and then
release.
The engine starts automatically.
The key returns to the ON position
when released.
Note
If the vehicle stalls after 5 seconds,
return the key to the LOCK position.
Slowly rotate the key to the START
position. If the security warning lamp
fl ashes, contact a Holden Dealer.
MY11_VE_DOM_BOOK.indb 211MY11_VE_DOM_BOOK.indb 211 17/12/2010 9:31:20 AM17/12/2010 9:31:20 AM
To Next Page
Loading...
