EasyManua.ls Logo

HOLDEN VE II Series 2011 - Page 269

HOLDEN VE II Series 2011
341 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vehicle care 267
Brake uid
(Automatic transmission)
Warning
Brake uid is poisonous and
corrosive and will damage the
paint nish of the vehicle if spilt.
Checking the brake uid level
Check the brake uid level weekly.
The level should be between the
MIN and MAX area.
If the uid level is correct, do not
remove the reservoir cap, as brake
uid exposed to the atmosphere will
quickly absorb moisture.
Adding brake uid
Use heavy duty brake uid. See
Recommended uids, lubricants and
parts on page 319 .
1. Turn the ignition off.
2. Wipe the sides of the cap clean.
3. Rotate anticlockwise to remove.
4. Top up with heavy duty
brake uid.
Warning
Use only new brake uid. Use of
old, used or inferior brake uid
may endanger the functioning of
the brake system.
5. Secure the cap and clean up any
spilt uid.
If the brake uid requires regular
topping up, contact a Holden Dealer
immediately.
Clutch/brake uid
(Manual transmission)
Warning
Clutch/brake uid is poisonous
and corrosive and will damage
the paint nish of the vehicle
if spilt.
Checking the clutch/brake
uid level
Check the clutch/brake uid
reservoir weekly.
MY11_VE_DOM_BOOK.indb 267MY11_VE_DOM_BOOK.indb 267 17/12/2010 9:31:31 AM17/12/2010 9:31:31 AM

Related product manuals