Holder C992 - Storage

Box Snow Blower
Owner’s Manual and Parts List
Page 11 of 28
Before storing your blower
, certain precautions should be taken to protect it from deterioration.
1. Clean the blower thoroughly.
2. Make all necessary repairs.
3.
Repaint all parts from which paint has worn or peeled and replace
4.
Thoroughly lubricate all moving parts
5. Secure hydraulic
hoses against the
6.
Store on a level surface in a dry environment.
7.
If possible, store in an area protected from direct
parts.
8.
If you need to store in a location where you need to lift, there is a
January 2013
Holder tractors Inc.
www.holdertractors.ca
STORAGE
, certain precautions should be taken to protect it from deterioration.
Repaint all parts from which paint has worn or peeled and replace
any missing or damaged decals.
Thoroughly lubricate all moving parts
and grease fittings..
hoses against the
blower to avoid damage.
Store on a level surface in a dry environment.
If possible, store in an area protected from direct
sunlight to avoid weathering of the paint and rubber
If you need to store in a location where you need to lift, there is a
lifting e
ye that can be seen here.
www.holdertractors.ca
, certain precautions should be taken to protect it from deterioration.
any missing or damaged decals.
sunlight to avoid weathering of the paint and rubber
ye that can be seen here.