HOLEMAKER HMPRO36AD User Manual

HOLEMAKER HMPRO36AD
Holemaker Portable Magnetic Drilling Machine
OPERATOR’S MANUAL
Holemaker Portable Magnetic Drilling Machine
OPERATOR’S MANUAL
WARNING!
BEFORE USE, ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS
ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL .
esahcruP fo etaD # laireS
HOLEMAKER PRO 50
BEWARE OF
ROTATING
MACHINE PARTS
LINE VOLTAGE
PRESENT
NEVER PLACE
FINGERS NEAR
CUTTING AREA OR
MACHINE ARBOR
HEARING PROTECTION
REQUIRED
EYE PROTECTION
REQUIRED
Ver: 1.10 14/08/2015
Holemaker Portable Magnetic Drilling Machine
OPERATOR’S MANUAL
WARNING!
BEFORE USE, ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS
ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL .
esahcruP fo etaD # laireS
HOLEMAKER PRO 50
BEWARE OF
ROTATING
MACHINE PARTS
LINE VOLTAGE
PRESENT
NEVER PLACE
FINGERS NEAR
CUTTING AREA OR
MACHINE ARBOR
HEARING PROTECTION
REQUIRED
EYE PROTECTION
REQUIRED
Ver: 1.10 14/08/2015
Ver: 1.01 31/07/2018
OPERATOR’S MANUAL
PRO 36
PRO 36
AD
AD
DRILLING MACHINE
WITH ELECTROMAGNETIC BASE
ul. Elewatorska 23/1, 15-620 Białystok, Poland
Phone: +48 85 678-34-00, Fax: +48 85 651-15-31
www.promotech.eu e-mail: office@promotech.eu

HOLEMAKER HMPRO36AD Specifications

General

Brand	HOLEMAKER
Model	HMPRO36AD
Category	Drill
Language	English

Summary

General Information

Application Overview

Describes the machine's drilling capabilities for various hole sizes and materials.

Technical Specifications

Lists key technical data including voltage, power, dimensions, and rotational speeds.

Included Equipment

Included Accessories and Parts

Details the components and accessories provided with the drilling machine.

Machine Dimensions and Design

Physical Dimensions

Provides the physical measurements of the Holemaker HMPRO36AD.

Design Overview

Illustrates the machine's design, including the control panel and key parts.

Safety Precautions

Usage Prohibitions

Lists conditions and situations where the machine must not be operated.

Safe Operating Practices

Outlines essential rules for safe handling, operation, and maintenance of the machine.

Startup and Operation

Handle Installation and Removal

Step-by-step guide for attaching and detaching the machine's operating handle.

Annular Cutter Installation and Operation

Instructions for installing, removing, and operating annular cutters.

Pre-Operation Preparation

Procedures for preparing the machine and workpiece before drilling.

Drilling Procedure

Detailed steps for performing drilling operations with the machine.

Motor Brush Replacement

Guidance on checking and replacing the motor's carbon brushes.

Wiring Diagram