HOLEMAKER PRO 40 User Manual

Holemaker Portable Magnetic Drilling Machine
OPERATOR’S MANUAL
WARNING!
BEFORE USE, ENSURE EVERYONE USING THIS MACHINE READS AND UNDERSTANDS
ALL SAFETY AND OPERATING INSTRUCTIONS IN THIS MANUAL .
esahcruP fo etaD # laireS
HOLEMAKER PRO 40
BEWARE OF
ROTATING
MACHINE PARTS
LINE VOLTAGE
PRESENT
NEVER PLACE
FINGERS NEAR
CUTTING AREA OR
MACHINE ARBOR
HEARING PROTECTION
REQUIRED
EYE PROTECTION
REQUIRED

HOLEMAKER PRO 40 Specifications

General

Drill Type	Magnetic Drill
Material	Steel
No Load Speed	450 RPM
Cutter Capacity	40mm
Drill Chuck Capacity	13mm
Twist Drill Capacity	13mm
Model	PRO 40
Application	Metal Drilling

Summary

Important Safety Instructions

Work Area and Personal Safety

Electrical Safety and Tool Handling

Safe electrical practices, proper tool usage, and cord care.

Operational Safety and Alertness

Critical Safety Procedures

Tool Maintenance and Disconnection

Preventing Unintentional Starts

Procedures to avoid accidental machine startup and ensure operator alertness.

Pre-Operation Checks and Guards

Inspecting for damage, using cutter guards, and checking controls.

Power Supply Requirements

Grounding Instructions

Proper electrical grounding procedures to prevent shock hazards.

Extension Cord Guidelines

Technical Data

Machine Operation: Before You Cut

Package Contents and Initial Inspection

Spoke Handle and Coolant Assembly

Using the Grub Screw Arbor System

Procedure for installing cutters using the grub screw arbor.

Machine Operation: Quick Grip Arbor

Using the Quick Grip Arbor System

Procedure for installing cutters using the quick grip arbor system.

Machine Operation: Making and Finishing Cuts

Making the Cut

Steps for positioning the machine, starting the cut, and applying pressure.

Finishing the Cut and Releasing Magnet

Procedures after the cut, including slug removal and magnet release.

Basic Troubleshooting

Magnet Holding and Motor Issues

Troubleshooting problems with magnetic base holding and motor operation.

Coolant System and Slug Ejection

Hole Quality and Cutter Breakage

Wiring Diagram